The combination air compressor, generator, and arc welder is the ideal tool for field repairs in remote locations

Dependability of high quality equipment is vital in every industry, so is working with equipment that can save both time and money. The combination air compressor, generator, and arc welder is the ideal tool for field repairs in remote locations. Save room on your service truck with this versatile all-in-one solution.

AGW Series Operation
Generator Mode:AC current only · Selector switch set to idle down · Switch is set to full throttle

Welder Mode:DC current only · Engine must be running full throttle · Selector switch must be set to full throttle

Features
Compressor Pump:Splash lubricated · Stainless-steel braided discharge hose · Large canister intake filter · Oil level sight indicator

Generator:Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings

Welder:Amperage selection switch, 170A or 220A maximum

Frame:Powder coated ASME coded receiver tanks · 14-gauge powder coated belt guard

Components:Regulator and two gauges for tank and outlet pressure · Manual drain valves for proper maintenance · 16.5-inch fly wheel

*Equipped with 150-PSI maximum rated regulator.

Specifications

  • Displacement/ Engine

    688cc Honda GX690 OHV with Electric Start - Battery Cables Included; Battery Not Included

  • Rated Speed

    3600 RPM

  • CFM @ 90 PSI

    30.5

  • CFM @ 175 PSI*

    29.0

  • Compressor

    Two Stage, Cast Iron

  • Tank Size

    20-Gallon Receiver Tank

  • Max. AC Output

    5000 watts

  • Rated AC Output

    4500 watts

  • Alternator Wattage: Cont. On-Load @ 90 PSI

    4500 watts

  • Alternator Wattage: Cont. On-Load @ 175 PSI

    4500 watts

  • Frequency/Voltage

    60Hz/120V/240V

  • Max. Amps (120V/240V)

    41.5/20.8

  • Cont. Amps (120V/240V)

    37.5/18.8

  • Receptacles

    (2) 120V, 20A GFCI Duplex; (1) 120V/240V, 20A Twist Lock

  • Duty Cycle (10 Min. Run Time)

    220A @ 40%, 190A @ 60%, 150A @ 100%

  • DC Voltage

    50-220A Working Range

  • Fuel Tank

    10.0 gallon

Weights & Dimensions

  • Net Weight

    803.00 lbs.

  • Shipping Weight

    870.00 lbs.

  • Length

    47.00 in.

  • Width

    24.00 in.

  • Height

    50.00 in.

Options

  • IX-0001 Vibration Isolator Pads

    Isolators protect the unit from vibration during use; recommended for models that are mounted in service truck applications