2 Inch Traffic Safety Cone - Tri-Glo - 1,000 Count

Tri-Glo Series 2-Inch Traffic Safety Cone — All-PVC One-Piece Construction for Maximum Durability

The Diamond Tool Store 0220-00 is a 2-inch, one-piece all-PVC traffic safety cone from the Tri-Glo Series, engineered for contractors and traffic control professionals requiring compact, high-visibility marking in a wide range of field conditions. Its all-vinyl construction delivers flexibility and durability across varying weather environments, while the high-density black PVC base creates a low center of gravity for stable placement. The UV-stabilized, highly pigmented safety-orange top coat maintains brilliant fluorescent color over extended outdoor exposure. This model meets MUTCD standards and is produced under ISO 9001 quality management, with NCHRP-350/MASH acceptance.

Technical Specifications

Weights and dimensions are nominal. Specifications are subject to change without notice. Please contact Diamond Tool Store for current information.

Available Sizes — Tri-Glo Series Stock Specifications

The 0220-00 distinguishes itself from standard delineators and markers through its one-piece all-PVC construction, which eliminates assembly failure points and ensures consistent performance across the full product life. The UV-stabilized pigmentation and verified heat resistance (no slump after 8 hours at 160°F) make it suitable for high-temperature paving and sun-exposed job sites where lesser materials degrade rapidly. Customization options — including in-molded stenciling, reflective 3M™ collars, and additional cone weights — allow contractors to adapt the product to specific project requirements without sourcing separate components.

Key Features & Benefits

One-Piece All-PVC Construction

The seamless single-piece design eliminates joints or bonded interfaces that can separate under repeated impact or temperature cycling. For contractors working in high-traffic or high-turnover environments, this translates directly to reduced replacement frequency and lower total cost of ownership.

UV-Stabilized Safety-Orange Color

The highly pigmented, UV-stabilized top coat resists fading under prolonged sun exposure, maintaining the brilliant fluorescent visibility required for effective traffic control. Long-lasting color integrity reduces the need to retire cones prematurely due to faded markings.

High-Density Black PVC Base — Low Center of Gravity

The high-density base concentrates mass at the bottom of the cone, providing maximum stability against wind and incidental contact. This is particularly valuable on open roadways or active work zones where cone displacement creates safety hazards.

All-Weather Flexibility

All-vinyl construction maintains flexibility across a broad range of temperatures, preventing the brittleness that causes cracking in cold conditions and the deformation that occurs with inferior materials in heat. The verified heat resistance (no slump after 8 hours at 160°F) confirms suitability for hot-mix asphalt and summer paving operations.

Verified Mechanical Performance

Published tensile strength (1200 psi min), elongation (200% min), tear strength (250 lbs/inch min), and Shore A hardness (75 ± 5) provide contractors and safety managers with quantifiable material performance data for specification compliance and procurement documentation.

MUTCD, ISO 9001, and NCHRP-350/MASH Compliance

Acceptance under MUTCD, ISO 9001 quality management, and NCHRP-350/MASH standards supports use on federally funded and DOT-regulated projects where compliant traffic control devices are required.

Customization Options

Available with in-molded stenciling, reflective 3M™ collars, and additional cone weights, allowing the base cone to be configured for specific visibility, identification, or stability requirements without sourcing separate aftermarket accessories.

Common Applications

Compact Traffic Delineation and Marking

The 2-inch profile is suited for close-quarters marking tasks where full-size cones would obstruct workflow or pedestrian movement.

Work Zone Safety

Used to delineate active construction and maintenance zones in compliance with MUTCD traffic control device requirements.

Paving and Asphalt Operations

Heat resistance to 160°F without slump makes this cone appropriate for placement near hot-mix asphalt operations and freshly paved surfaces.

Indoor and Facility Safety Marking

The compact size and all-PVC flexibility make it practical for interior facility hazard marking, wet floor delineation, and similar applications where a smaller footprint is required.

Compatible Materials

• Asphalt (hot-mix and cold-mix)

• Concrete surfaces

• Gravel and compacted aggregate

• Pavement and roadway surfaces

• Interior flooring (concrete, tile, warehouse surfaces)

Frequently Asked Questions

Q: What standards does the 0220-00 cone meet?

A: The 0220-00 is manufactured to MUTCD standards, produced under ISO 9001 quality management, and is NCHRP-350/MASH accepted.

Q: Can this cone be customized with reflective collars or stenciling?

A: Yes. Available options include in-molded stenciling, reflective 3M™ collars, and additional cone weights as customization options for the Tri-Glo Series.

Q: What is the heat resistance rating of this cone?

A: The cone shows no slump after 8 hours at 160°F, making it suitable for use in high-temperature environments including active paving operations.

Q: Is the safety-orange color fade-resistant?

A: Yes. The top coat uses highly pigmented, UV-stabilized PVC specifically formulated to resist fading under prolonged ultraviolet exposure.

Q: Are larger sizes available in the Tri-Glo Series?

A: Yes. The Tri-Glo Series includes models ranging from 5 inches up to 36 inches in height, with multiple weight options at each size. Contact Diamond Tool Store for availability.