SawMaster SDT-1000XL Tile Saw
SawMaster SDT 1000XL Tile Saw | Wet Tile Saw for cutting oversized tiles
The SDT-1000XL is known among tile installers for its ability to deliver exceptional performance on tiles of all sizes. In fact, the SDT-1000XL was the first of its line to truly support oversized tiles—a significant feature by today's standards due to the common use of large tiles in modern construction. The latest generation of the SDT-1000XL continues to offer the same large cutting capacity and 1-1/2 HP motor of its predecessor. In addition, it addresses the issue of portability by including frame-mounted wheels to ease the task of transporting the saw around the job site.
Stainless Steel Water Tray
Stainless steel provides the highest degree of durability among water trays, making it suitable for heavy-duty jobs.
Transportation wheels mounted at the rear of the frame allow the saw to be moved in a "dolly" fashion for greater convenience.
Table Retention Device
The cutting table is equipped with a spring lock to secure the cutting table when transporting the saw in between job sites.
Rubber Matted Cutting Table
The new cast aluminum cutting tables are covered by a rubber mat that is injected directly onto the table and chemically bond for ehanced durability.
Adjustable Cutting Height
Cutting depth can be easily adjusted to accommodate 6" to 10" blades and to provide plunge cutting functionality.
The patented LCBH (Liquid Cooled Bearing Housing) works with the water pump to cool down the bearing housing during saw operation, which increases the service life of the bearings even under heavy loads.
Thermal Overload Protection
Automatic thermal overload protection prevents the motor from overheating and protects the saw from power surges.
Blade Guard with Brushes
The blade guard contains brushes that not only minimize spray, but they also uniformly distribute the water over the blade for more effective cooling.
Because oversized tiles often exceed the width of the cutting table, a substantial amount of water is lost by spilling over the edges. The drip guard alleviates this problem by catching the water and returning it to the tray. During transportation, the Drip Guard can be lowered to secure the water tray in place.
The splash guard reduces water spray to prevent the loss of water cooling during operation and to keep the work site clean.
|Motor||115 V/60 Hz|
|Horsepower||1 1/2" HP|
|Blade Capacity||6" - 10"|
|Cutting Depth||3 1/2"|
|ABS Water Tray||Equipped|
- Blade CR1080C(10" Cheetah Series Specialty Wet Tile Blades)
- Stand SDT-1000SW