Skip to content

Economy Fabrication Package

Sale Sale
Original price $6,362.53
Original price $6,362.53 - Original price $6,362.53
Original price $6,362.53
Current price $5,560.00
$5,560.00 - $5,560.00
Current price $5,560.00
SKU: DTS-ECNMY-FBPCK
Finance as low as $/mo

Economy Fabrication Package - Sale on Blue Ripper Rail Saw, Stone Router, Polishing Pads, Diamond Blades

1. Blue Ripper Jr. Rail Saw with Blue Ripper Rails 148inch (12' 4") & Blue Ripper Rails 92inch (7' 8")

The Blue Ripper Jr.™ Rail Saw makes full plunge cuts up to 4 cm in depth. By using the rail system there is no need to use gauges, shims, or offset measurements. Your rail is your guide. With this rail system you will have accuracy and smoothness absolutely better, and faster, than by hand.

  • Makita 5477NB hypoid saw, or
    Milwaukee 6477-20 worm-drive saw, or
    Skill SHD77M worm-drive saw, or
    Bosch 1677M worm-drive saw.
  • 6 Pack of 8" Archon blades
  • 7ft and 13ft rails included
  • Inline GFCI (Ground Fault Circuit Interrupter)
  • Standard 3/4 inch quick disconnect water fittings with 10ft of hose!

Specifications

  • Takes full plunge cuts past 4cm deep!
  • Up to 4 FPM cut speed, single pass through 2cm absolute black!
  • 4,300 motor RPM
  • Accepts up to 8" blades
  • Standard 5/8" blade Arbor
  • One-hand water disconnect
  • Easy-adjust locking height adjustment
  • Only 19.8 pounds in weight!
  • Manufactured with PRIDE in the USA!

$2,693.25 Regular

Blue Ripper Jr. Rail Saw

 

2. Dia Plus Archon 8" Blade for Blue Ripper Junior Saw - 6 Pack

 

This diamond blade is for Blue Ripper Junior Rail Saw from Omega Diamond. The 8 inch diamond blade is made with an array pattern of diamonds to optimize cutting performance. The granite blade is long lasting and easily cuts granite and other hard stones. The blade can be used on a Blue Ripper or any other type of rail saw.
Traditionally, fast-cutting diamond blades did not have a long life-span, and long-lasting blades did not cut fast.
Long life and fast cutting speed were incompatible. Now, both fast cutting speed and long life exist in the same diamond blade - the Arrayed Pattern Diamond Blade.
  • Diamonds specifically pattern-arrayed in each segment
  • No more random diamond placement in blade segments
  • 30% longer blade-life than traditional blades
  • Uniform diamond exposure to the stone surface over entire segment life
  • No uneven segment deterioration or premature diamond loss
  • Smoother cut with virtually no chipping
  • Standard segment height of 10mm

$340 Regular

3. Amigo M2 Stone Router

 

The ORIGINAL AMIGO M2 STONE ROUTER is first the light duty router machine on the market to offer ~3 horsepower with TRUE Variable Speed Control. It's TRUE 0-8500rpm range makes it perfect for polishing as well as cutting & grinding. Weighing only 35lbs & with a simple three prong power adapter, the Amigo M2 is very easy to use at any job site. The power of the ORIGINAL AMIGO M2 STONE ROUTER will allow you to profile stone up to 3 inches thick, this capability is unrivaled in the fabrication trades.

They say "Imitation is the best form of flattery", but do not be fooled by the fakes. Only the Original M2 Profile Router can provide the consistent performance the industry has come to expect from the Amigo brand of products.

Amigo M4a's revolutionary HYDROFLOAT base is extremely easy to operate. Machine glides on water with a simple touch without even touching the stone. No need to cover up the stone before use or no replacing rollers!

Specifications

  • 110v
  • ~3hp/2000watt/16amps
  • 0-8500 rpm TRUE variable speed control
  • 40mm maximum stone thickness
  • 100mm maximum attachment diameter
  • 35lbs

$1980 Regular
Amigo M2 Stone Router

 

4. Alpha VSP-320 Variable Speed Wet Polisher

 

Alpha® has replaced the VSP-120 with the newly designed VSP-320. Although the general appearance of the machines are similar, we have made a major overhaul on these models to make them durable and dependable tools. The major upgrade came in the form of the heavy-duty gear systems that includes the step-down transmission and a bevel and pinion gear to produce the variable speed range of 700 to 2,500 rpm. Thanks to the high-tech machine center, we have all parts precision-machined to reduce noise and vibration during the application. This upgrade ensures a long-lasting tool life and a comfortable application.

Specifications

  • Rating.................................120 Volts
  • Amperage.................................... 7.0
  • Power............................................800 W
  • Speed (Variable).............700~2500 RPM
  • Weight.............................7.3lbs/3.3 kg
  • Spindle.........................................5/8"-11

$322.54 Regular
Alpha VSP-320 Variable Speed Wet Polisher

 

 

5. Makita 9565CV Variable-Speed Angle Grinder

 

5 stage variable speed control dial for matching the RPM to the work improved 12 AMP motor design for increased output power in a more compact tool

Larger and improved carbon brush material for longer tool life. Electronic limiter stops the motor and prevents accidental motor overload and burnout. "Tool-less" wheel guard adjustment for easy clamping. Labyrinth construction seals and protects the motor and bearings from dust and debris by creating a complex set of channels.

Full manufacturer's warranty.

Specifications

  • 12 Amp
  • 5 inch maximum diameter
  • 2800~10500 RPM variable
  • 4.0lb weight
  • 5/8"-11 spindle

$178 Regular
Makita 9565CV 5 inch Grinder

 

6. Dia Plus Dry Diamond Core Bit for Granite and Stone- 1 3/8" size

The Diamond tool store Supreme Black Dry Bit is manufactured in Korea and is made with the highest quality diamonds in the industry. The Diamonds are located on the inside and outside of the core bits barrel that reduces friction, which in turn results in lower heat and less drag. The reduced heat allows the bit to preform at higher RPMS without decreasing the life of the bit.

The Diamond Tool Store Supreme Black Dry Bit is ideal for Granite and engineered stone applications, and can be used on a variety of Tools including drills and Hand Grinders. With a Standard 5/8"-11 female ​•thread and a plethora of adaptors available the Black Wet Bit is sure to work with almost any tool in your shop.
The Cutting Depth for the Red Dry Core bit is approximately 3 1/2 inches, and can be increased with extensions and adapters.

$50.00 Regular
Dia Plus Dry Diamond Core Bit

 

7. Dia-Plus Premium Diamond Polishing Pads Set

 

These polishing discs, with a diamond thickness of 3.5mm, is among the very best available. This disc is specially formulated for maximum flexibility, making it the best choice for polishing curved and oval surfaces. Use them wet, with hand-held grinders- 1,500 to 4,500 RPM, with floor machines - 175 rpm.

Available in 4" only. Made in Korea


Specifications

  • 4inch diameter
  • 7 pads: #50, #100, #200, #400, #800, #1500, #3000
  • Flexible resin
  • Hook and look back

$84 Regular
Dia-Plus Premium Diamond Polishing Pads

 

8. Diaplus Cosmo 3 Step Pads

Thanks to Diaplus technology, Diamond Tool Store has launched our newest and greatest pad with even higher diamond concentration. You will achieve an ultimate polished shine with the Cosmo 3-step Diamond Polishing Pad. Save time, money and achieve the greatest results with this unique 3-step polishing pad.

$44.85 Regular

 

9. Zous Aluminum Ratchet Seam Setter

$150 Regular

10. Tenax Titanium Extra Clear Knife Grade 2 lb (.88 KG) Container - 2 Pack

Tenax Titanium Vinyl Ester Extra Clear Knife Grade is the latest generation of vinyl ester glue formulas.
Titanium Extra Clear is virtually completely clear in film during application
Tenax Titanium is extremely strong with excellent adhesion with a very fast cure time of about 15 minutes.

$48 Regular

 

Diamond Brazed Flat Cup Wheel

 

The diamonds are brazed directly to the disc to ensure excellent grinding and cutting power by the direct contact of diamond particles onto the working materials. Very cost effective! Comes with 5/8"-11 thread attachment.


Specifications

  • 5 inch diameter
  • Brazed diamond segments
  • 5/8 inch 11 thread attachment

$88.00 Regular

 

11. Dia Plus Super Premium Turbo Blade- 5" Diameter

Diaplus Black Turbo Blade is ideal for cutting and shaping hard stone. The close separation allows for fast, chip-free cutting! Using the Black Turbo Blade with a flush cut adapter allows you to get into tight spaces.

Specifications

  • High diamond concentration & quality for extended life
  • Use on grinders or wet stone saws
  • Dry or wet use
  • Cooling holes extend life by cooling blade core
  • Made in Korea

$23.00 Regular

 

12. Full Bull Nose - Amigo Router Bit

 

Best Value for your money! These profiler bits fit all standard router machines. Comes with high quality bearing. Please contact us if you are looking for a grit/size/attachment that is not listed on this website.

Specifications

  • 1-1/4 inch or 3 cm
  • Coarse grit
  • An adapter may be needed for certain routers

$136 Regular

 

13. Ogee - Amigo Router Bit

 

Best Value for your money! These profiler bits fit all standard router machines. Comes with high quality bearing. Please contact us if you are looking for a grit/size/attachment that is not listed on this website.

Specifications

  • 3/4 inch or 2 cm
  • Coarse grit
  • An adapter may be needed for certain routers

$120.00 Regular

 

14. 4" xtra Flex Hook & Loop Backer Pad and Rigid Backer Pads

 

$28.95 Regular

15.

GoClips Sink Clips 25 Per Bag - STD

Advantages:

  • Grinder with a blade is all you need
  • No special tools needed
  • Self-locking with spring clip
  • Fits sink rims up to 3/4 inch and 1/8 inch
  • Quick and easy
  • Professional results every time
  • Load Max of 100 lbs per each clip

$34.95 Regular

 

16. Heavy Duty Water Proof Apron


Heavy-Duty design
PVC made

$14.99 Regular

 

 

Razor Blades - 100 Count - 5 Packs

$26 Regular