We're Here to Help! Call Us at +1 (800) 342-3876

Laticrete  |  SKU: ST309-0632

StoneTech Heavy Duty Stone Sealer

$23237
Shipping calculated at checkout.


Size

Safe & Secure Payments.

  • Amazon
  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Meta Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Note: Hazardous chemicals must be shipped via UPS Ground. All other shipping options will be removed from checkout if added to cart. If you need expedited services for non-hazardous products, please make a separate transaction.

Stone Sealer for Sealing and Protecting Limestone, Granite, Marble, Slate, and More

Features + Benefits of Stone Sealer:

  • Advanced penetrating microbond protection
  • Heavy duty protection against all stains
  • Makes cleaning stone easier
  • Preserves natural look
  • Water-based low-solids coating
  • Interior & exterior

Where to Use

Natural stone such as marble, granite, limestone, slate, terrazzo, travertine & sandstone.

Directions

Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings.

1. Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated.

2. Sealer may be applied to damp surfaces one hour after standing water has been removed.

3. Liberally apply an even coat using a paint pad, low-pressure chemical-resistant sprayer, roller or brush.

4. Allow sealer to penetrate the surface for 15-30 minutes. During this time, distribute excess over entire area to insure even penetration. Wipe entire surface thoroughly with clean dry towel.

5. A second coat may be needed for porous, absorbent surfaces and should be applied 30-40 minutes after initial application as directed in steps 3-4.

6. A minimum of 15 minutes after final application, wipe entire surface with a clean dry towel to remove any excess sealer. If needed, dampen white nylon pad with sealer to remove residue and dry again thoroughly with clean dry towel.

7. A full cure is achieved after 24-72 hours; foot traffic may begin in 6-8 hours. Cover with red rosin paper, if foot traffic must resume before the recommended time periods have passed.

8. Clean equipment with water.

Available Sizes (and Coverage)

  • Quart: 50-400 sq. ft.
  • Gallon: 200-1,000 sq. ft.
  • 5 gallons

Expected Wear: 3-5 years on interior surfaces & 1-3 years on exterior surfaces.

**Please note that Air shipping will not be availabe with this item.