Surface Logix | SKU: 131M-1G

Cobble Loc Matte

$97⁰⁷

Shipping calculated at checkout.

Size

1 Gallon 5 Gallon

Product variants

Safe & Secure Payments.

Note: Hazardous chemicals must be shipped via UPS Ground. All other shipping options will be removed from checkout if added to cart. If you need expedited services for non-hazardous products, please make a separate transaction.

Cobble Loc Matte is the newest technology in water based protection for concrete pavers, natural stone, stamped concrete, roofs, concrete surfaces and over TD One Step. Gallon size that makes 2 Gallons.

Featuring the same wet look enhancement as our original Cobble Loc, with a modern matte finish!

A two-part, water-based kit, Cobble Loc Matte allows the applicator to clean and seal pavers in the same day, even on damp surfaces. Provides an enhanced, wet look appearance and modern matte finish in an eco-friendly, low-VOC formulation.

Combined in a 1:1 ratio with water to create the final product, a 1 gallon kit of Cobble Loc Matte will make up to 2 gallons of finished product and a 5 gallon kit of Cobble Loc Matte will make up to 10 gallons of finished product. Each gallon of finished product covers approximately 200 sq. feet, depending on your surface. Unlike other clear finishes, Cobble Loc Matte has excellent resistance to brake fluid, gasoline, bleach, and acids, and helps lock down joint sand.

Please note: 5 gallon pail displayed. Read label thoroughly before applying product. Cobble Loc Matte is not recommended for use on surfaces where moisture is unable to dissipate.

FOR PROFESSIONAL USE ONLY

Product Directions

Surfaces must be clean and free of any contaminants before sealing. Concrete should cure a minimum of 28 days before sealing. On smoothly troweled concrete, an acid etch is recommend using muriatic acid.

Cobble Loc Matte contains a part A and part B that must be mixed together. On pavers, dilute with one part water to one part mixed sealer and apply with roller or sprayer.

For best results, it is recommended to mechanically mix with a power mixer for a minimum of 2 - 5 minutes. Apply a uniform coat heavy enough to wet out joints if sand stabilization is desired. A second coat of sealer may be appropriate depending on the porosity of the substrate. The 2nd coat can be applied after 4-6 hours of dry time.

As a topcoat over Coloron, Colorcrete or TD One Step, apply a uniform coat undiluted by water. To avoid buildup of sealer, do not apply Cobble Loc Matte more than once every 2 years.

READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT.

COBBLE LOC MATTE IS NOT RECOMMENDED FOR USE ON SURFACES WHERE MOISTURE IS UNABLE TO DISSIPATE.

FOR PROFESSIONAL USE ONLY

Features

Water based sealer for stone, concrete and pavers
Eco-friendly and low VOCs (less than 50g/l)
New matte finish
Pressure clean and seal bricks same day
Same wet look and enhancement as solvent based sealers
Provides water and tire marking resistance
May be applied over damp surfaces
Helps lock down joint sand
Inhibits weed growth and anthills
Catalyzed product that provides chemical resistance to gasoline and oil leakage
Excellent paver sealer and protectant from various stains

Applications

Clear protective coating for concrete and pavers
Preserves and protects travertine, natural stone and most porous surfaces
Excellent top coat over Colorcrete, Coloron, and TD One Step
Provides chemical protection against brake fluid, gasoline, bleach and acids
Protects concrete tile roofs
Used in paver repair and maintenance
Applied after concrete stamps utilization to produce natural and realistic results

Fantastic Results

I used the Cobble Loc Matte on 1 year old Unilock Mattoni pavers that are installed around our above ground pool. The results are fantastic. The depth of paver color and appearance are great. The product was easy to work with and application was straight forward. Now time will tell how well it holds up to Chicago weather over time.