Seals and protects all natural stone, engineered quartz, polished porcelain tile and grout against stains. Before sealing your stone or concrete make sure the area is cleaned well with one of our cleaners.
- Perfect for all natural stone with polished, brushed and honed finishes.
- Does not alter the material’s natural look.
- Excellent protection for kitchen countertops and bathroom vanities.
- Suitable for decorated concrete tile and reconstructed stone.
- Ideal for grout joints, crackle tile, marble resin and stone slabs.
Features & Specifications
- MAKES EVERYDAY CLEANING EASY.
- ECO-FRIENDLY: SOLVENT FREE.
- IS NOT AFFECTED BY RESIDUAL HUMIDITY: CAN BE APPLIED 24-48 HOURS AFTER INITIAL CLEANING.
- DOES NOT FORM A FILM, DISCOLOR OR YELLOW OVER TIME.
- FAST SETUP: THE SURFACE CAN BE WALKED ON AFTER JUST 4 HOURS.
- TREATED SURFACES ARE SAFE FOR FOOD CONTACT.
- VERY LOW VOC EMISSIONS: CONTRIBUTES TOWARDS LEED CREDITS.
- PFOA FREE: NON CARCINOGENIC.
IDEAL FOR
ALL NATURAL STONE, ENGINEERED QUARTZ, POLISHED PORCELAIN, GROUT
HOW TO USE IT
Matte and polished finish natural stone, decorated concrete tile and manufactured stone, polished porcelain, quartz: On a clean, dry surface, apply MP90 ECO PLUS with a paintbrush or lambswool applicator, making sure to fully saturate the surface.
Let sit for 10 to 15 minutes, then wipe and rub the surface to allow the product to completely penetrate and remove any excess with a dry cloth, lambswool pad or sponge.
The surface may be used for normal foot traffic after 4 hours.Full cure and maximum sealer protection is achieved in 8 hours.
PLEASE NOTE: Before full application, test the product on a small, inconspicuous area of the surface (especially on highly absorbent materials) or loose sample to check for any discoloration. Apply and leave the product to dry in a well ventilated area. MP90 does not protect marble, travertine and limestone from acid stains.