Cobble Cure

$59⁹³

Shipping calculated at checkout.

(1)

Hazmat product. Shipping is available please call for details 800-342-3876

Size

1 Gallon 5 Gallons

Product variants

Safe & Secure Payments.

Note: Hazardous chemicals must be shipped via UPS Ground. All other shipping options will be removed from checkout if added to cart. If you need expedited services for non-hazardous products, please make a separate transaction.

Cobble Cure is a solvent blend used for rewetting or liquefying solvent based clear sealers that have “blushed” or shown white discoloration due to moisture entrapment. Gallon Size call for larger sizes

This product is to be used on brick pavers, natural stone & concrete surfaces where the sealer has become cloudy due to trapped moisture.

Product Directions

Before You Begin: Surfaces must be clean and free of any contaminants before sealing. Cobble Cure’s performance is directly related to how thoroughly the surfaced is prepared. All grease, oil and potential contaminates must be removed.

Do not apply when the temperature of the air or the surface to be coated is below 50°F. Testing on your surface is always recommended to ensure desired results.

Note: This product should be used before deciding whether it is necessary to strip the sealer from pavers or other substrates. On a dry surface, roll or brush Cobble Cure onto the whitened areas of the surface. Once the areas are saturated simply let the area dry. The whitened film should clear within minutes. Avoid excessive rolling or brushing of the Cobble Cure as it will work as a stripping agent of the sealer.

If the sealer has been applied with a coating that is too thick, you will see the coating crystallize and not reform a uniform appearance. In this case, stripping of the film is recommended. If haziness disappears, then roll or spray Cobble Cure across entire surface. Repeat if necessary.

Application: Apply with a 3/8” to 3/4” nap roller cover.

Pump Sprayer: Spray by overlapping each pass. Always apply in an even film deposit

Features

Releases moisture trapped in film forming sealers
May eliminate the need for stripping the substrate
For pavers, natural stone and concrete that have been coated with one or two layers of sealer.

Applications

Removal of hazy or cloudy appearance from sealer applied to a substrate

Cobble Cure Data Sheet

SDS Sheets

Miracle

This product is amazing and works a miracle on patios where moisture has been trapped by the sealer. We had our patio sealed with a sealer that did not allow moisture to evaporate. When rain would hit and sit on the patio, it created a white cloudy cover over the patio obstructing the color of the pavers. Cobble cure is the only product I have found that dissolves this white substance. It worked immediately and was very easy to apply (with an herbicide/pesticide sprayer.) I am so thankful to have found this product, it restored my pavers to their original color. The 1 gallon container allowed for a subsequent application the following year. Thank you!