Titebond All Purpose Construction Adhesive - 12 per Order

Titebond Solvent-Based All Purpose Construction Adhesive is a versatile formula designed for general purpose interior and exterior applications that bonds common building materials.

It is highly water-resistant and offers a longer working time for precise assembly while remaining permanently flexible.

Features & Benefits

• Recommended For: Interior And Exterior Construction, Remodeling & Repair Projects
• Ideal For Interior And Exterior Projects
• Water-Resistant
• Long Working Time
• Compatible Materials: Common Building Materials Including Wood, Paneling, Drywall, Ceramic Tile, Metal, Concrete, Concrete Block, Foamboard And Tub Surrounds.
• Solvent-Based
• Foamboard & Plastics
• Extremely Versatile

Application Guidelines

• Application Temperature: 0°F to 100ºF
  
• Service Temperature Range:-20ºF to 120ºF
  
• Working Time: Approximately 10-20 minutes for a 1/4" bead
• Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion.
• Application: Cut tip on slant for 1/4” to 3/8” bead. Puncture inner seal and place in cartridge gun. Apply adhesive to one of the surfaces in either a continuous or spot bead. Paneling or foam: Apply 1/4” bead around perimeter 1” from edge and two zigzag beads in middle. Framing members:Apply directly to studs. Press materials firmly together with a slight twisting motion. Nail as needed. For drywall, use fasteners in accordance with local building standards. Note: For large panels, bracing may be required until adhesive dries.
• Cleanup: Tools and adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions. NOTE: Test solvent on an out-of-the-way area to make sure it will not mar or attack the surface.
• Limitations: Not designed for continuous submersion. When applying over paint, wallpaper, ceramic tile or other thin non-porous surfaces, you must first "rough up" the area by sanding or scraping. Do not adhere one non-porous material to another since this will slow or prevent drying. Do not apply to polystyrene foam if the temperature is above 90°F.

Physical Properties

• Type: Synthetic elastomeric polymer
• State: Medium-viscosity mastic
• Color: Tan
• Solids: 74%
• Viscosity: 130,000 cps
• VOC: > 300 g/L
• Flashpoint: < 0ºF
• Freeze / Thaw Stability: Will not freeze
• Storage Life: 18 months in tightly closed containers at 75°F
• Odor: Alcohol-like

Coverage

Size	1/8" bead	1/4" bead	3/8" bead	1/2" bead
10 Oz.	129 ft.	30 ft.	14 ft.	8 ft.
28 Oz.	355 ft.	86 ft.	39 ft.	21 ft.