Kenco Slab Crab is a concrete slab removal bucket for bridge deck and concrete pavement removal projects

Slab Crab buckets are the solution for concrete slab removal. They range in bucket widths from 36 to 54 inches. All standard models are manufactured to process slabs ranging from 4" to 19" thick and will fit 20,000 - 150,000 pound excavators and backhoes. They are available as a direct pin-on or can be used with the Kenco Wedgebolt Coupler.

REMOVE CONCRETE SURFACES RAPIDLY

The process of using the slab removal bucket is quite simple. The existing concrete will need to be cut into smaller, more manageable pieces for concrete slab removal. The size of these pieces are limited only by the lifting ability of the machine as each bucket is built to withstand its unique weight class. At this point the slab removal process quickly becomes a one man job. Just slide the teeth under the pavement and tilt up. This action will cause the pavement to break off cleanly at the cut. The slab can then be lifted and placed directly onto the bed of a waiting truck or stacked out of the way. There is no debris cleanup and the subbase doesn't get damaged.

When the job requires slab removal, the Slab Crab is the superior choice.

The quickest way to remove bridge decks, airport runways, sidewalks and other surfaces that use poured concrete slabs. Just slide the teeth of the Slab Crab under the pavement and lift it up. Slabs are removed intact.

Concrete slab lifter buckets can be fabricated to widths larger than 54 inches. Throat opening can be customized to accept required slab thicknesses.

MODEL WEIGHT BUCKET WIDTH SLAB THICKNESS DATA NUMBER OF BUCKET TEETH
EX200 2500 Pounds
1133.98 kg
36 Inches
91.461 cm
4 - 12 Inches
10.16 - 30.48 cm
3
EX250 2900 Pounds
1315.417 kg
42 Inches
106.68 cm
4 - 12 Inches
10.16 - 30.48 cm
4
EX300 3200 Pounds
1451.495 kg
48 Inches
121.92 cm
4 - 12 Inches
10.16 - 30.48 cm
4
EX400 5000 Pounds
2267.962 kg
54 Inches
137.16 cm
4 - 19 Inches
10.16 - 48.26 cm
5