Note: Hazardous chemicals must be shipped via UPS Ground. All other shipping options will be removed from checkout if added to cart. If you need expedited services for non-hazardous products, please make a separate transaction.

TENAX WHITE KNIFE GRADE POLYESTER GLUE 1 LITER

Colors or Pigment for stone available

Tenax white knife grade is a high quality polyester mastic adhesive used to vertically and horizontally repair, rebuild, glue, and fill marble, granite and engineered stones. Colored knife grade will cure shiny and is very polishable. Not suitable for temperatures below 32°. Recommended for interior use. Other colors available upon special request.

DIRECTIONS FOR USE:

Make sure the surface to be treated is dry, clean and free of dust. If coloring, add the coloring paste to the resin before mixing it with the catalyst. An excess of coloring paste may affect the final product so use caution. Mixing ratio of resin to catalyst is 100:2 - 3 (see chart below). Stir vigorously and apply. Do not place unused product back in can. Make sure the cans are sealed tightly after use.

SHELF LIFE:

Keep away from heat, humidity and sun. Product will last at least 12 months if kept between 65° - 77°.

SAFETY:

Please read the safety data sheet before use and follow the product instructions.

 

  • Gel time in bulk at 77º: 4-5 min
  • Tacky free time at 77º: 25-30 min
  • Working time at 77º: 60-80 min
  • Temp range for use after hardening: 32º to 230º
  • Ratio of glue to hardener: 100/2-3% in weight

 

TENAX WHITE FLOWING POLYESTER GLUE 1 LITER

Tenax White Flowing is a high quality polyester mastic used to horizontally repair, rebuild, glue and fill marble and quartz surfaces. Tenax Flowing will cure shiny and is very polishable. Not suitable for temperatures below 32°F. Recommended for interior use. Other colors available upon special request.

INSTRUCTIONS FOR USE:

Make sure the surface to be treated is dry, clean and free of dust. If coloring, add the coloring paste to the resin before mixing it with the catalyst. An excess of coloring paste may affect the final product so use caution. Mixing ratio resin to catalyst is 100:2 - 3 (see chart below). Stir vigorously and apply. Do not place unused product back in the can. Make sure can is sealed tightly after use.

25°C = 77°F

SHELF LIFE:

Keep away from heat, humidity and sun. Product will last at least 6 months if kept between 65°F - 77°F.

SAFETY:

Please read the safety data sheet before using.

 

  • Gel time in bulk at 77º: 3-4 min.
  • Tacky free time at 77º: 15-25 min.
  • Working time at 77º: 60-80 min.
  • Temp range for use after hardening 32º to 230º
  • Ratio of glue to hardener: 100/2-3% in weight

TDS Report