TSL15C4T16 Monument Lift was designed to safely lift, move and place precast concrete, marble, or granite monuments
- 1500 LB Capacity
- 4 to 16 inch grip range
- 6" X 10" elastomer pads, small actuator
DESCRIPTION
TSL15C4T16 MONUMENT LIFT
The Monument lifter was designed to safely lift, move and place precast concrete, marble or granite monuments. This stone lifting clamp has a maximum capacity of 1500 pounds and a grip range of 4 to 16 inches. The large variance in gripping range makes it the perfect solution for picking up and setting monuments of various sizes. Our stone lifting devices use the same mechanical actuator to allow one pick after another, as with the well-known Barrier Lift, with no ground assistance.
Our engineers have developed an all-new design, giving this lifter a wider grip range without compromising safety or grip strength. This is achieved by the addition of two separate pivot locations on each leg. Depending on the width required to be lifted, the leg pins are placed into corresponding hole positions. Decals located next to each leg pin identify correct placement. The lower pin position covers grip ranges from 4 inches to 10 inches, while the upper pin position covers grip ranges from 10 inches to 16 inches.
| WEIGHT | 250 lbs |
|---|---|
| DIMENSIONS | 36 × 18 × 24 in |
| MODEL | WEIGHT | CAPACITY | GRIP RANGE |
| TSL15C4T16 | 120 pounds 54.43 kg | 1500 pounds 680.388 kg | 4 – 16 inches 10.16 – 40.64 cm |