PRO12 MQ Essick PRO12 Series Stationary Mixer
For almost 90 years MQ Essick plaster / mortar mixers have set the standard for innovation and durability. The 12 cubic foot capacity PRO12 series increases contractor productivity in applications using on-site silo dispensing systems. The PRO12 uses a powerful hydraulic drive to power through the toughest mix designs. A unique over-center dump design easily discharges material into large mud tubs with minimal operator fatigue.
- Reduced fatigue by enabling operator to load at waist level. Ergonomically designed to load low and dump high.
- Adapt to any job site, while maintaining a compact footprint, with 130° swing-away stabilizers.
- Extra thick 1/4" steel drum wrap with 3/8" ends resists wear and dents.
- Adjustable height - discharge height 24" ~ 42.5".
- Easily fits in a standard pickup truck bed with its compact design with inboard hydraulic motor.
- Extended run times - up to 8 hours - with 5-gallon fuel tank.
- Costly waste is reduced by a spill plate that directs excess material into the tub.
- Tackle stiff mix designs, and handle up to 1-inch aggregate, with a powerful hydraulic drive.
- Convenient access forklift pockets from any side of the mixer.
- Drive and dump controls easily accessible and located above the engine cowling.
- Greasable paddle shaft seal provides long service life.
Unit Specifications
| Capacity | 12 ft³ | 340 L |
| Bags | 3-4 | |
| Max. Aggregate Size | 1 in | 25.4 mm |
| Adjustable Drum Discharge Height | Up to 42.5 inches | |
| Drive System | Hydraulic | |
| Dump Action | Hydraulic | |
Dimensions & Weights
Engine Specifications| Overall Length | 73.5 in | 1917.7 mm |
| Overall Width | 35.0 in | 889 mm |
| Overall Height | 45.0 in | 1143 mm |
| Operating Weight | 1580 lb | 716.68 kg |
| Engine Make/Model | Honda / GX390 | |
| Start Method | Recoil | |
| Engine Power | 11.7 HP | 8.7 kW |
| Fuel Type | Gasoline | |
Notice: Features and equipment specifications are subject to change without notice