Dakota Sinks DSE-HCA3320 Signature Elements Series 32 7/8 Inch Handmade Copper Single Bowl Apron Front Kitchen Sink - Hammered Copper
The tradition of hammering copper is a metalworking tactic used for generations to toughen copper sheets. A ball peen hammer is generally used to shape the indentations before the sheet is manipulated into its desired shape. Copper is additionally hammered for aesthetic purposes. Over time, pure copper can start to naturally oxidize in its environment, developing a copper patina. Patina is commonly a green or brown film on the surface of copper, bronze or different comparable metals. The extra depth and dimension created through hammering the surface of copper makes patina much less obvious as it starts to appear.
Features:
- 99.8% copper content
- Extra Large Sound Cancellation Pads
- Thermal Undercoating
- Included Accessories - Bottom Grid(s) DSE-BGHCA3320, Basket Strainer DSA-PBSSS and Kit
- cUPC listed
- Lifetime Limited Warranty
Specifications:
- Number of Basins: 1
- Material: Copper
- Installation Type: Undermount and Apron Front
- Gauge: 14
Dimensions:
- Width: 32 7/8 Inch
- Front to Back: 20 3/4 Inch
- Depth: 9 1/2 Inch
- Minimum Cabinet Size: 36 Inch
DIMENSIONS AND MEASUREMENTS
| Number Of Basins | 1 |
| Installation Type | Apron Front / Undermount |
| Material | Copper |
| Finish | Copper Tones |
| Included | Basket Strainer / Bottom Grid |
| Drain Placement | Center |
| Sink Gauge | 14 |
| Sink Shape | Rectangle |
| Collection | Signature |
| Warranty | Lifetime Limited |
| Certifications and Listings | cUPC Certified |
| Width | 32.88 |
| Front to Back | 20.75 |
| Depth | 9.5 |
| Minimum Base Cabinet | 36 |
| Inner Basin Length (in.) | 30 |
| Inner Basin Width (in.) | 16.1 |